Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:eingabe_der_scher-_und_mischteile:troester_scherteil_rex [2025/01/16 15:01] – [Troester shearing section] cschall
+++ en:eingabe_der_scher-_und_mischteile:troester_scherteil_rex [2025/05/06 14:27] (aktuell) – cschall
@@ Zeile 6: / Zeile 6: @@
 {{ :eingabe_der_scher-_und_mischteile:abb_troester_02_de_en.svg?nolink&400 |}}
-All values required in the mask must be entered for the Troester shear element. These include shear element length $L$, the initial flight depth $H^*$ (maximum flight depth) that can be measured on the element and the final flight depth $s$, i.e. the flight depth of the overflow or shear flight. In addition to these values, it is also necessary to enter the flight widths and the screw clearance. The pitch angle is calculated automatically from the values entered. Depending on the size of the pitch angle, a positive or negative pressure gradient can be set.
+All values required in the mask must be entered for the Troester shearing section. These include shear element length $L$, the initial channel depth $H^*$ (maximum channel depth) that can be measured on the element and the minimum channel depth $s$, i.e. the channel depth of the overflow flight. In addition to these values, it is also necessary to enter the flight widths and the screw clearance. The pitch angle is calculated automatically from the values entered. Depending on the size of the pitch angle, a positive or negative pressure gradient can be set.
 {{ :eingabe_der_scher-_und_mischteile:rex180_troester_en_001.png?nolink |}}