≪ View Page

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
en:eingabe_der_zylinderdaten:eingabe_der_zylinderdaten [2024/09/13 21:54] – neelesten:eingabe_der_zylinderdaten:eingabe_der_zylinderdaten [2025/05/12 15:45] (aktuell) – cschall
Zeile 1: Zeile 1:
 ======Define barrel data  ====== ======Define barrel data  ======
  
-The content is currently being processed and will be made available shortly. Please be patient.\\ +The barrel can be created or edited via //Configuration// > //Barrel// or optionally via the toolbar. 
- +
-The barrel can be created or edited via “Configuration > Barrel” or optionally via the toolbar. +
  
 {{ :eingabe_der_zylinderdaten:abb_symbollleiste_zylinder.png?nolink |}} {{ :eingabe_der_zylinderdaten:abb_symbollleiste_zylinder.png?nolink |}}
  
-In the upper part of the opening window, the barrel length is specified in mm or as a multiple of the nominal diameter. The barrel must always be at least as long as the screw. +In the upper part of the window, the barrel length is specified in millimeter or as a multiple of the nominal diameter. The barrel must always be at least as long as the screw. 
  
  
Zeile 15: Zeile 13:
 It is important here that the entered temperatures correspond to the barrel wall **internal** temperatures! This means that a corresponding distance between the zones is recommended, as the interpolation of the entered temperatures better reflects the real barrel inner wall temperatures. It is important here that the entered temperatures correspond to the barrel wall **internal** temperatures! This means that a corresponding distance between the zones is recommended, as the interpolation of the entered temperatures better reflects the real barrel inner wall temperatures.
  
-The start of the first heating zone is assumed in REX to be the location of heat separation. The [[en:berechnungen:aufschmelzverlauf|melting calculation]] to determine the location of the melt vortex formation (OSW) only starts from the beginning of the first heating zone and the melting calculation starts from the OSW. +The start of the first heating zone is assumed in REX to be the location of heat separation. The [[en:berechnungen:aufschmelzverlauf|melting calculation]] to determine the location of the melt vortex formation (OSW) only starts from the beginning of the first heating zone and the further [[en:berechnungen:aufschmelzverlauf|melting calculation]] starts from the OSW.  
 + 
 +You can define the [[en:eingabe_der_zylinderdaten:eingabe_eines_nutbuchsenextruders|grooved bush geometry]] for the cylinder via the //Grooved bush// tab.
  
-Related links: \\ +===Further topics=== 
-  *  [[en:Eingabe der Zylinderdaten:Eingabe eines Nutbuchsenextruders]]+  * [[en:eingabe_der_zylinderdaten:eingabe_der_zylinderdaten|]] 
 +  * [[en:eingabe_der_zylinderdaten:eingabe_eines_nutbuchsenextruders|]]