Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:installation_und_deinstallation:umgangberechnung [2025/01/13 15:10] – [Defining the Screw Position in the Calculation Settings] neelest
+++ en:installation_und_deinstallation:umgangberechnung [2025/04/15 10:37] (aktuell) – [Multigraphics and Result Comparison] cschall
@@ Zeile 15: / Zeile 15: @@
 Once the screw position is defined, the process can be started. The software runs the calculations in batch mode, meaning that two processes are calculated consecutively:
-  *     **First step**: Calculation with the screw in the front position.
+      * **First step**: Calculation with the specified screw position
-  *     **Second step**: Calculation with the screw in the rear position.
+      * **Second step**: Calculation with the front screw position (if selected)
+      * **Third step**: Calculation with the screw position at the rear (if selected)
 {{ :berechnungen:rex171_ber_007_en.png?nolink |}}
-This two-step calculation process simulates the effects of the different screw positions on the process and generates the corresponding results. This allows the user to conduct a detailed analysis of the process behavior under different screw positions.
+This decoupled multi-stage calculation process simulates the effects of the different screw positions in the process and generates the corresponding results. This allows the user to carry out a detailed analysis of the process behaviour under different screw positions.
 ===== Displaying and Comparing Results =====
 Once the calculations for both screw positions are completed, the results are available for analysis. There are several ways to view the results for the different screw positions:
-  *    ** Toolbar button**: Use the "Show results for different screw positions" button in the toolbar to directly access the calculated results.
+  *    ** Toolbar button**: You can access the calculated results directly via the //Show the results for the different screw positions// button in the toolbar.
-  *     **Menu option**: Alternatively, you can select "Graphics" → "Compare Screw Positions" from the menu to visualize the results.
+  *     **Menu option**: Alternatively, you can select //Graphic// → //Compare screw position// from the menu to visualise the results.
-===== Multi-graphic and Result Comparison =====
+===== Multigraphics and Result Comparison =====
-After selecting the results, a multi-graph is opened, which displays both calculations (screw front and screw rear) side by side. This graphical representation provides a direct comparison of the process behavior for the different screw positions. In the multi-graph, you can compare both calculation results to analyze the impact of the different screw positions on the process.
+After selecting the results, a multigraphic is opened, which displays both calculations (screw front and screw rear) side by side. This graphical representation provides a direct comparison of the process behavior for the different screw positions. In the multigraphic, you can compare both calculation results to analyze the impact of the different screw positions on the process.
-For a comprehensive analysis of the simulation results, you can also use the quick-access button "Open all standard diagrams". This allows you to open all relevant diagrams simultaneously, providing a quick and efficient comparison of all calculated results.
+For a comprehensive analysis of the simulation results, you can also use the quick-access button //Open all standard diagrams//. This allows you to open all relevant diagrams simultaneously, providing a quick and efficient comparison of all calculated results.