Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- en:materialdaten:eingabe_von_mischungen [2025/01/13 14:36] – [Step 3: Component A - Load or create polymer] neelest
+++ en:materialdaten:eingabe_von_mischungen [2025/05/20 13:41] (aktuell) – [Completion of the mixture creation] cschall
@@ Zeile 3: / Zeile 3: @@
 =====Step 1: Open material=====
-To create a new mix, open a process and navigate to the //Edit material// area in the Material menu.
+To create a new mixture, open a process and navigate to the //Edit material// area in the Material menu.
 =====Step 2: Switch to the mix view=====
-Once you have opened the relevant material, click on the //Switch to mix// button. This will take you to the special view for creating and managing mixtures. In this view, you can add several components, which are then processed into a new material mix.
+Once you have opened the relevant material, click on the //Change to mixture// button. This will take you to the special view for creating and managing mixtures. In this view, you can add several components, which are then processed into a new material mix.
 {{ :materialdaten:rex_171_mischen_001_en.png?nolink |}}
@@ Zeile 15: / Zeile 15: @@
 The first component of the mixture is component A, usually a polymer.
-Select an already saved polymer from the material library by clicking on //Load polymer//\\
+Select an already saved polymer from the material library by clicking on //Load polymer from file or database//\\
-If the desired polymer is not available, create a new polymer by clicking on //Create new polymer// and entering the relevant technical data. Make sure that the data is entered completely and correctly, as it has an influence on the final result of the mixture.
+If the desired polymer is not available, create a new polymer by clicking on //edit polymer// and entering the relevant technical data. Make sure that the data is entered completely and correctly, as it has an influence on the final result of the mixture.
 {{:materialdaten:rex_171_mischen_002_en.png?nolink|}}
@@ Zeile 28: / Zeile 28: @@
 Once both components (A and B) have been selected or created, define the mixing ratio. This is usually done by entering the respective percentages or mass proportions of the two components.
-Click on //Define mixing ratio//. Enter the desired proportions of the components, e.g. 70 % polymer A and 30 % filler B.
+Enter the desired proportions of the components, e.g. 70 % polymer A and 30 % filler B.
+=====Step 6: Definition of viscosity=====
+The viscosity can be determined in several ways. Either the rheological data of the mixture can be specified directly or mixing rules can be used.
+Mixture rules for polymer-polymer mixtures (with component proportions $w_A$ and $w_B$):
+  * Logarithmic: $$log(\eta_M)=w_A log(\eta_A)+w_B log(\eta_B)$$
+  * Mantford's rule of mixtures: $$\eta_M^{\frac{1}{3,4}}=w_A \eta_A^{\frac{1}{3,4}}+w_B \eta_B^{\frac{1}{3,4}}$$
+  * Mixture rule according to Takayanagi (with continuous phase c, dispersed phase d and phase fraction of the dispersed phase of $\Phi_d$): $$\eta_M=\eta_c \cdot \frac{3 \eta_c + 2\eta_d - 3(\eta_c-\eta_d) \Phi_d}{3 \eta_c + 2\eta_d+2(\eta_c-\eta_d) \Phi_d}$$
+Mixture rules for polymer-filler mixture (with filler content $\Phi_F$):
+  * Einstein's mixing rule: $$\eta_M=\eta_p(1+2.5\Phi_F)$$
+  * Mixture rule according to Hashin: $$\eta_M=\eta_p(1+\frac{2 \Phi_F}{1-\Phi_F})$$
 =====Completion of the mixture creation=====
-Once the mixing ratio has been defined, save the mixture by clicking on //Save// or //Create mixture//. The newly created mixture can now be used for simulations, calculations or further processing in plastics technology.
+Once the mixing ratio has been defined, save the mixture by closing the window via the //Ok// Button. The newly created mixture can now be used.
@@ Zeile 38: / Zeile 51: @@
   * [[en:materialdaten:datenbankanbindung_an_pam|]]
   * [[en:materialdaten:allgemeineangaben|]]
-  * [[en:materialdaten:rheologische_materialdaten|]]
   * [[en:materialdaten:thermodynamische_daten|]]
   * [[en:materialdaten:dichtedaten_bzw._spezifisches_volumen|]]
-  * [[en:materialdaten:tribologische_daten|]]
+  * [[en:materialdaten:rheologische_materialdaten|]]
   * [[en:materialdaten:technologische_daten|]]
+  * [[en:materialdaten:tribologische_daten|]]
+  * [[en:materialdaten:zusatzstoffe|]]
   * [[en:materialdaten:molekulargewicht|]]
   * [[en:materialdaten:faserabbau|]]
   * [[en:materialdaten:eingabe_von_mischungen|]]