Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt. ======Define internally tempered screws====== ===== Internally tempered screws ===== It is possible to calculate "externally" internally tempered screws in REX. "External" means that an external temperature control unit flushes a cooling medium with a defined input temperature and flow rate through the screw core in order to temper it. This usually involves cooling, but heating can also be calculated. {{ :eingabe_der_schneckendaten:abb_innentemperierung_01_de_en.svg?nolink&600 |}} The internal temperature control is defined via the dialogue for entering the screw and the //Internal cooling// button. {{ :eingabe_der_schneckendaten:rex171_innentemp_en_001.png?nolink |}} In the window that opens, you can set in the drop-down list at the top whether the screw has no internal cooling or has an external internal cooling. {{ :eingabe_der_schneckendaten:rex171_innentemp_en_003.png?nolink |}} The bore and the inner pipe as well as the thermal conductivity of the screw and the inner pipe must be specified under the //Screw// tab. For steel, 45 W/(m*K) is assumed here as standard. The tempering medium must be defined in the //Cooling medium// tab. You can choose between "Water", "Oil" (Regloplas RO 150) and a user-defined medium. In addition to the medium itself, the inlet temperature and the flow rate must also be specified at the bottom of the window. {{ :eingabe_der_schneckendaten:rex171_innentemp_en_002.png?nolink |}} ===Further topics=== ==Input of the screw== * [[en:eingabe_der_schneckendaten:eingabe_der_schneckendaten|]] * [[en:eingabe_der_schneckendaten:eingabe_innentemperierter_schnecken|]] * [[en:eingabe_der_schneckendaten:schneckenzonen|]] * [[en:eingabe_der_schneckendaten:einzugs-_metering-_und_entgasungszone|]] * [[en:eingabe_der_schneckendaten:kompressions-_und_dekompressionszone|]] * [[en:eingabe_der_schneckendaten:barrierezone|]] * [[en:eingabe_der_schneckendaten:mailleferzone|]] * [[en:eingabe_der_schneckendaten:stegwechselzone|]] * [[en:eingabe_der_schneckendaten:wave-zone|]] ==Input of shearing and mixing parts== * [[en:eingabe_der_scher-_und_mischteile:maddokscherteil|]] * [[en:eingabe_der_scher-_und_mischteile:wendelscherteil|]] * [[en:eingabe_der_scher-_und_mischteile:zahnscheibenmischteil|]] * [[en:eingabe_der_scher-_und_mischteile:rautenmischteil|]] * [[en:eingabe_der_scher-_und_mischteile:kreuzlochmischteil|]] * [[en:eingabe_der_scher-_und_mischteile:zylindrisches_und_konisches_scherteil|]] * [[en:eingabe_der_scher-_und_mischteile:troester_scherteil_rex|]] * [[en:eingabe_der_scher-_und_mischteile:kavitaetenmischteil|]] ==Non-return valves (PSI)== * [[en:rueckstromsperren:zylindrisches_und_konisches_rsp-element|]] * [[en:rueckstromsperren:ringspaltsegment|]] * [[en:rueckstromsperren:rohrsegment|]] * [[en:rueckstromsperren:ring-rueckstrom-sperre|]]