Printing

Printing can be done via the Toolbar,

Project→Print or via Ctrl + P. A menu opens with the Print settings.
PDF files can also be created using a ‘pdf printer’.

The paper, portrait or landscape format and distances to the edges can be selected here

• Preview: opens a print preview

• Print: Starts printing

• OK: Closes the menu, changed settings are saved

• Cancel: Closes the menu, changed settings are not saved

• Help: opens these instructions

The header, footer and cover page can be configured in the top tab (here „Dzs.ppro“).

All subsequent tabs correspond to a new sheet in the printing process and can be customized or deactivated for printing.

General information on the process and a short report on the results can be printed out here.

All diagrams that can be displayed during the process can be selected and configured here.

Diagrams that are not curves can be selected here. In PSI, comparison diagrams for front/rear screw position can also be selected here.

Lists of results for the diagrams and user-configured result lists can be selected and printed here.

Information of the material can be selected here.

Here you can select partial areas of the machine, a full-page overall view and details of individual screw zones.

Data sheets can be selected for printing here.

Variations for printing can be selected here.

Another way to print diagrams is to right-click on the diagram and select Print from the menu that appears. Only the diagram will be printed.

Here you can print currently displayed diagrams and result lists from the multigraph.

The sub-areas of the fiber length distribution can be selected for printing here. How length distribution works: Up to 4 diagrams are printed per page. The entries „from“ and „to“ are the positions of the first and last diagram, the others are equally spaced in between.